SLA - Stereolithography

Somos Taurus Resin

High strength and durability with heat resistance up to 90°C. Thermoplastic appearance and properties for a wide range of applications.

Material Characteristics

Detail

75%

Strength

85%

Flexibility

55%

Tensile strength

65-70 MPa

HDT

89 °C

Elongation

18-25 %

Modulus

2400 MPa

Enclosed and Connected Volumes Enclosed parts? Not recommended. Connected parts? Not recommended.

Engraving and Relief Min. height and width of details - Relief: 0.5 mm, Engraving: 0.5 mm

Min. Wall Thickness Min. Wall Thickness 0.8 mm - with ratio 1:6

Print Resolution and Accuracy Standard layer thickness: 100 μm, Accuracy: ±0.2% (with lower limit ±0.2 mm)

Max. Size 600 x 600 x 400 mm

Automotive prototypes, robotic parts and industrial fixtures. Ideal for parts requiring a combination of toughness and thermal resistance (ABS-like).

Deep cavities, thin walls below 0.5 mm.

ABS-like Tough Durable Thermostable Automotive Functional

Painting Metal Plating Dyeing Screen Printing